ACCESS CONTROL SYSTEMS


Access control systems can be divided into four distinct disciplines: AUDIO, DIGITAL, MAG SWIPE and PROXIMITY. The best solution for your access control may be obtained after reading the following.


Audio Access Control

These systems usually consist of a Power Supply, Audio Door Station, one or more Telephone Handsets and a Door Release Mechanism. The Power Supply will be connected into a local mains supply and will provide power to the Audio Door Station, which will be located outside of the building adjacent to the entrance door being secured. Connected to this will be the Telephone Handset(s) which will be strategically positioned within the building so as to compliment ease of use. Also connected to the Audio Door Station will be the Door Release Mechanism, which should be rated so as to compliment the security of the system.

Once the “Call Button” on the Audio Door Station has been pressed it causes the Telephone Handset to buzz. When the Telephone Handset has been answered and the identification of the caller has been verified the Door Release Mechanism can be energised via a button on the Telephone Handset. The door can now be opened.


Digital Access Control

These systems usually consist of a Power Supply, Digital Keypad and a Door Release Mechanism. The Power Supply will be connected into a local mains supply and will provide power to the Digital Keypad, which will be located outside of the building adjacent to the entrance door being secured. Also connected to the Digital Keypad will be the Door Release Mechanism, which should be rated so as to compliment the security of the system. 

Access is granted upon entry of a code.  This can either be a common code, issued to all users of the system or individual codes (PIN – personnel identification numbers) issued to each user of the system. 

Common codes can provide medium security for very small groups (perhaps 5 to 10) of users in a controlled environment.  The problem with this set up is that the code gets passed on to or is seen by third parties very quickly.  Otherwise it can provide useful low security access control. 

PINs are more secure because users are less likely to divulge their own number. PINs can be used within a system to record an individual’s movements. For more than a small number of users 5 to 6 digit PINs should be considered to maintain the very low probability of guessing or keying another user’s PIN. 

Convenience for the user is excellent because possession of something is not required. 

Mag Swipe Access Control

These systems usually consist of a Power Supply, Mag Swipe Reader, an Access Control Unit (ACU) and a Door Release Mechanism. The Power Supply will be connected into a local mains supply and will provide power to the ACU, which will be located inside of the building. This in turn provides power to the Mag Swipe Reader, which will be positioned adjacent to the entrance door being secured. Also connected to the ACU will be the Door Release Mechanism, which should be rated so as to compliment the security of the system. 

Access is granted when a valid card is passed through the Mag Swipe Reader.  Magstripe cards are mostly unique to the holder. They are more difficult to duplicate than keys but an expert can copy the information programmed into a card. 

The cost per user is minimal. 

Security with this type of system is generally good because each card is different and if lost or copied the card in question can easily be voided from the system. 

Convenience is good as the cards are slim and can easily be stored with credit cards. 

Administration of cards within a system is easy. 

Mag Swipe readers require an open slot for the card to pass through and therefore the readers are often vulnerable to vandalism.  The continual motion of cards passing through the reader can also shorten the life expectancy of the reader head itself. 

Proximity Access Control

These systems usually consist of a Power Supply, Proximity Reader, an Access Control Unit (ACU) and a Door Release Mechanism. The Power Supply will be connected into a local mains supply and will provide power to the ACU, which will be located inside of the building. This in turn provides power to the Proximity Reader, which will be positioned adjacent to the entrance door being secured. Also connected to the ACU will be the Door Release Mechanism, which should be rated so as to compliment the security of the system.

Access is granted when a valid token is presented to the Proximity Reader.  Proximity Tokens are unique to the holder. They are extremely difficult to duplicate. 

The cost per user is moderate.
 

Security with this type of system is good because each token is different and if lost the token in question can easily be voided from the system. 

Convenience is excellent as tokens can be presented to the reader whilst still in wallets, bags, badge holders, etc. 

Reliability of tokens is excellent, especially the passive types, which do not contain batteries. Tokens with a lifetime warranty are available. 

Administering tokens is easy. 

Proximity readers do not require openings to read tokens and are therefore less susceptible to vandalism.  Vandal proof solutions can be integrated into most readers and some readers even have the technology to be incorporated within the structure of the building being secured. 

 

 

Home | Intruder Alarm System | Closed Circuit TV I Environmental Alarm I Access Control Systems I Locksmith I Fire Alarm System I Emergency Lighting I Fire Extinguishers I FAQ I Contact Us

 

Copyright © 2000 JD Internet  & Coomber Security Systems Ltd All rights reserved
Tel: 01823 282 888  Revised: August 21, 2002 Disclaimer